20 Door Handle Replacement Websites Taking The Internet By Storm
Door Handle Replacement
It's worth it to replace door handles if you don't like the way they appear, or if they're difficult to use. With some patience, you can install the new handle in no time.
Modern door handles are usually equipped with cover plates that hide the screws for an attractive look. If the new handle doesn't have screws already attached, you will have to attach them separately.
Remove the old Handle
Door handles aren't just an an important aesthetic addition to your home, but they're vital for safety since they let you lock and unlock your door. Over time the door handle could start to lose its grip or feel loose. It might also begin to look old and worn. This is a sign that it's time to replace the door handle.
If your door handle is becoming difficult to use, it might be time to replace it. This is a serious issue as you will no longer be capable of locking or unlocking the door and put you and your family at risk.
Another reason to replace your door handle is when it's damaged or broken. A damaged or broken door handle can be extremely dangerous, particularly in the event that your children or senior family members struggle to open it and could get trapped within. It's a good thing that it's easy to fix a broken door handle by simply replacing the old one.
The majority of modern door handles are a standard size and therefore will fit on any door. If you're unsure if the new door handle you're buying will work, try removing the old one and measuring the holes in its housing. This will allow you to buy the right size door handle.
The most straightforward method to remove your old door handle is to take it off of the door. This is typically done with a screw driver. However, some door handles have the cover plate which hides the mounting screws so you'll need to pry off this cover plate to get access to the screws beneath. After removing the handle that was previously used, take note of the way in which the spindle has been connected. This will assist you in aligning the new handle.
You can also remove the door handle by depressing the latch mechanism. You can use a screwdriver to remove the door handle. But, you'll have to locate the tiny latch which is located on the edge cut piece. After you have removed the latch, take off the handle and the strike plate. Then remove the latch from the door's edge.
Take off the Strike Plate
You'll have to replace your latch plate when replacing the handle. This is the plate that is the one that holds the hole in which the door's latch hooks in when the door is closed. The box that the new handles are packaged in will include two latch plates - a rectangular one and a circular one (see the diagram above for the components of a door handle). If you have a rectangular latch plate, replace it with an oval one. This will allow the latch to hook into the strike plate and make the handle more convenient.
The first step is to remove the screw holding the latch plate. These screws can be quite tight and will require some force to loosen. It may be helpful to have a second person help in this area if it is possible.
Once the screws are removed and the latch plate will slide out of the door easily. If it is stuck or doesn't move, use a small nail file to scratch around the edges of the latch plate. This may help free the plate.
Now you can move on to making the new door strike plate for installation. Screw the latch plate into the doorjamb using the wood screws that came with the new handles. Be cautious not to tighten too much the screws, as this can damage the strike plate.
If you are not sure whether the latch plate is in the correct position, shut and then open the door to check whether it locks and closes correctly. If not then you'll need to adjust the strikeplate up or down or forward or back until the door locks properly.
If the door is still moving or jiggles, you might have to expand your latch hole on the strike plate. This is more prevalent on older doors. It can be caused by wear and tear, hinges that are too narrow, the incorrect size of the latch or a damaged strike plate. If this is the situation then you should use a filing made of metal instead of a chisel or hammer to adjust the strike plate.
Remove the Latch
The latch is the angled metal piece that slides between the hole in the inner edge of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. It also hooks into an opening in the door frame to keep the door shut. If your door shakes when you close it, replacing the latch may be the only thing needed to correct the issue.
It's hard to see the screws that hold the latch to the door, but there's usually a small slot on the trim plate that permits you to insert a screwdriver into the slot and pry it off. After taking off the trim plate you should be able to remove the latch as well as the bolts that hold it and the spindle.
If upvc door handles Repair My Windows And Doors is not easily removed, use a paperclip or tool to remove it from the handle mechanism. Place the item into the slot for the latch that is recessed and gently twist it or jiggle until you feel that the latch and handle are beginning to separate. You may have to repeat this procedure several times before you can take the latch off.
It should be possible to slide the new latch into its slot with no issues once you have removed the old one. Make sure the latch is correctly positioned in the slot and aligned with the screw chambers, and then use the new screws to fasten it to the strike plate and door frame.
Before you install the new handle, be sure to measure your existing backset (the distance from the centre of the big hole on the front surface of the door to the edge). Verify that the size of the latch of the new handle matches the measurement.
You'll require a brand new cylinder for your lock if you're replacing the latch and handle or if your current one is damaged. If you're not changing the locks, the new latch should fit in your existing recess, and work with your current keys. Select a latch with rectangular cover plates that match the handles you have.
Removing the Cover Plate
Door handles can start to look shabby with time, but if you replace them with a modern lever-on-rose design, it's an easy and quick DIY and decorating project that will enhance the overall appearance of your home. You can buy complete sets that include escutcheons, privacy adaptors and escutcheons.
To replace an internal door handle remove the cover plate (or rose), which covers the screws and mechanism. Utilize a flathead to take off the cover plate. It may have a slot along one edge or be secured by a pin.
Remove the screw that holds the handle in the interior and place it aside when the cover plate is removed. Remove the screws that hold both the inner and outer plates. You can loosen them using a Philips Screwdriver. Then, you can remove the outer plates and latch plate from the door and put them aside.
Some doors don't have this gap. If it doesn't, you'll need to drill a hole into the door to install the new handle. This is the same process as opening a door locked however you'll have to be extra cautious not to harm the frame or door.
After drilling the holes, you'll need to install new screws for the door knob. Buy the same size as your old screws to ensure that you don't get a handle that is too loose or tight. You'll also need to install an additional strike rod and latch plate that aren't part of the majority of door handle sets.
If you're looking for a quality replacement for your interior door handle set Try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit product and has received hundreds of 5-star reviews. It's a great choice to replace damaged or worn door handle hardware inside your Chevy HHR.